MDT Metal Magazines – Short Action

MDT Metal Magazines – Short Action

$129.90$149.90 incl. GST

All MDT Metal Short Action Calibre Magazines.

308WIN, Creedmore, BR / BRAI, ARC, 223Rem based Cartridges

MDT METAL MAGAZINES – SHORT ACTION

MDT AICS-pattern metal magazines are manufactured from high strength steel, nitride-finished and coated with Cerakote Elite for ultimate durability and performance. The short action magazines are offered for .308 Win and 6.5 Creedmoor family cartridges, and are available in 5-round, 10-round capacity. The 6mm BR magazine is offered for the 6mm BR and family of cartridges, and are available in 10 round capacity. These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard. The 10 and 12-round magazines are available with or without the front binder plate. See details below for benefits and limitations of each version.

DETAILS

MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.

SPECIFICATIONS

5-Round Magazines for 308:

  • 3.055” Outside Length
  • 2.870” max cartridge overall length (COAL) with binder plate
  • 2.960” max cartridge overall length (COAL) with binder plate
  • 2.52” Rear Height

7-Round Magazines for .300WSM:

  • 300 WSM, 6.5 PRC, 7 RSAUM
  • 2.955″ COAL

10-Round Magazines for 308:

  • 3.055” Outside Length
  • 2.870” max cartridge overall length (COAL) with binder plate
  • 2.960” max cartridge overall length (COAL) without binder plate (see limitations below)
  • 3.90” Rear Height

12-Round Magazines for 308:

  • 3.055” Outside Length
  • 2.870” max cartridge overall length (COAL) with binder plate
  • 2.960” max cartridge overall length (COAL) without binder plate (see limitations below)
  • 4.61” Rear Height

12-Round Magazines for 6mm:

  • 3.055” Outside Length
  • 2.505” max cartridge overall length (COAL) with binder plate and spacer
  • 4.61” Rear Height

MDT 10-round magazines are approximately ¾” shorter in height than standard AICS 10-round magazines due to MDT’s unique Double Stack to Single Feed (DSSF) transition design, allowing easier mag changes when shooting prone.

10-round magazine includes 2 internal ribs that help reduce friction between the cartridge and magazine body and provide a smooth transition from a double stack to single feed at the top of the magazine.

6MM CALIBER MAG

From testing, we have established that these magazines will work with the following calibers:

  • 6mm BR Norma
  • 6mm BRA
  • 6mm BRX
  • 6 mm Dasher
  • 22 BR

MDT 6BR Metal MagAdditionally, through testing, we have found that these magazines ARE NOT COMPATIBLE WITH the following actions:

  • Curtis Custom’s Axiom and Vector
  • GAP Tempest
  • Ultimatum Deadline
  • and most other commonly available, aftermarket 3-lug actions

BINDER PLATE DETAILS

  • The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”. MDT Magazine Binder Plate diagram 01
  • The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below). DO NOT order these magazines without a full understanding of this. MDT Magazine No Binder Plate Diagram
Weight .2 kg
Dimensions 18 × 15 × 4 cm
Calibre

308, 6BR, 6ARC, 223Rem

Magazine-size

5 Round, 5 Round (No Binder Plate), 10 Round, 10 Round (No Binder Plate)

Reviews

There are no reviews yet.

Be the first to review “MDT Metal Magazines – Short Action”

Your email address will not be published. Required fields are marked *

Shopping Cart
MDT Metal Magazines – Short Action
$129.90$149.90 incl. GSTSelect options
Scroll to Top